How to fix Polar 92 EM error 82

Discussion in 'Cutters and Trimmers' started by pressmachines, Aug 17, 2017.

  1. pressmachines

    pressmachines Member

    Joined:
    Jan 2008
    Messages:
    66
    Location:
    Philippines
    Please help me fix error 82 on my Polar 92 EM. I have already change both the IAR and AR boards as per the Polar Service Manual. Thanks in advance. My email address pressmachines@yahoo.com
     
  2. pressmachines

    pressmachines Member

    Joined:
    Jan 2008
    Messages:
    66
    Location:
    Philippines
    Also I have check the wiring harness connecting the IAR and AR boards. Thanks in aadvance. My email address is pressmachines@yahoo.com
     
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir
    Hope you are well.
    i recommend you first test the power supply FOR TO fix his problem 82 in Polar 92 EM:+5VDC +24VDC +42VDC
    The lack or missing one of them, specially 5 +24 for IC TTL +CMOS will be NOT work any NEW BOARD OR OLD.
    In any cases, if the power supply is o.k for 5 +24 the 42VDC feed the Y315 solenoid can be happen 2 things: 1) Mechanical problem
    with his Solenoid LUBE IT 2) Winding inside (Reheating) Replace it.
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    See his email
     
Loading...