Horizontal printing Strip magenta 6cm wide at the back of paper 45cmx32cm?

Discussion in '4-Color Offset Presses +' started by Mario, Apr 17, 2019.

  1. Mario

    Mario New Member

    Joined:
    Apr 2019
    Messages:
    2
    Location:
    MAlta
    Horizontal printing Strip magenta 6cm wide at the back of paper 45cmx32cm? Did anyone encounter the same problem?
     

    Attached Files:

  2. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    683
    Location:
    Vermont
    if all your roller settings and pressure settings check out to be fine, then as a last resort you might want to try moving the oscillation a bit, so that the offending mark falls into the gap.
     
  3. Mario

    Mario New Member

    Joined:
    Apr 2019
    Messages:
    2
    Location:
    MAlta
    Thank you for your information because it was the oscillation making that mark.
    Thanks & Regards
    Mario Grima
     

  4. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    683
    Location:
    Vermont
    You're welcome. Now its up to you to pass on what has been freely given to you when you can.
     
Loading...