Help with Adast MS115-2

Discussion in 'Cutters and Trimmers' started by PrintAll, Oct 18, 2017.

  1. PrintAll

    PrintAll New Member

    Joined:
    Oct 2017
    Messages:
    3
    Location:
    Guatemala
    Hello guys,

    We have a problem with our Adast guillotine that the actual position does not match to the position indicated on the screen, there is a difference of 1.5 cm.

    Recently the problem got even worse that the gap of difference is variable, sometimes 1.5 cm and some times 2 cm and so on.

    My technician told me that the problem is that the bronze piece were the screw shaft is moving in and out, is already worn out.

    Could this be the problem?

    And if yes where can I get this new bronze piece?
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Good day sir:
    I hope you are well.
    Are 3 possibilites problem: 1) From the tech is saying a Good Possibility. Shaft worn out.
    2) Enconder defective or dirty, or loose connection 3) Brake of backgauge is dissajustment or worn.
     
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    The bronze piece, you can get it from KBA dealer or owner from ADAST factory, or machine shop.
     
Loading...