Help - need expert - Xerox 242

Discussion in 'Xerox Color Laser Printers & Color Copiers' started by Mary Lou, Jul 13, 2015.

  1. Mary Lou

    Mary Lou Member

    Joined:
    Sep 2013
    Messages:
    41
    Location:
    Fort Mitchell, KY
    Had a transfer belt put in by a technician Friday. Now I am getting small dots repeating every 1.75". On an 11 x 17 sheet the dots are at 7.25" from the left and running the entire 17" side. I just put in a new black drum and 2 new color drums. Any suggestions?
     
  2. Mary Lou

    Mary Lou Member

    Joined:
    Sep 2013
    Messages:
    41
    Location:
    Fort Mitchell, KY
    In the service manual I found this for Bands, Streaks, Spots, and Smears that appear on the image at a regular pitch. Repetition Spacing (mm) - 4 BCR (Y, M, C). I'm not sure what BRC means.
     
  3. InterfaceP

    InterfaceP Senior Member

    Joined:
    Sep 2013
    Messages:
    189
    Location:
    Dallas, TX
    Its the small black roll that lays next to the drum, last I checked it was PRC (primary charge roll) not BRC, but things change.

    You probably have a piece of large paper dust on it. See if you can locate it and carefully wipe it off.
     
Loading...