Help me Ryobi / Itek 3985 (3302M)

[tai]

I have an offset printing machines Ryobi / Itek 3985 (3302M), 1991, when the keyboard controller mounted on the jack ball wrong, then I plugged it right back the CPI report. How do you fix the advice please help. Thanks
Email: tranvantaidn@gmail.com

 

[tai]

Ryobi/itek 3985 (3302M) displaying C-P-I

I have an offset printer Ryobi / Itek 3985 (3302M) how CPI-screen controls, you would know to help me troubleshoot. Thank you.

 

[tai]

Ryobi/itek 3985 (3302M) displaying C-P-I

We request you that our ryobi/Itek 3985 (ryobi 3302M) is getting problem when we swith on the machine a message is displaying that C-P-I and the machine is running and controls are also not working please do needful in this regards.

thanking you

 

[tai]

Ryobi/itek 3985 controls panel displaying C-P-I - Please, everyone, help me

Ryobi/itek 3985 controls panel displaying C-P-I, machine not work, please help me troubleshoot. Any feedback will be appreciated.

 

[ziggy33]

Never seen that before and all of my books for the 3302 don't say anything about it

 

[dmblair]

Your second unit normal rotation inch button (green button) is stuck. The press is stuck in an electrical trouble shooting mode right now. See if you can free up the button or buy a new one and replace it and the cpi will go away. You might even be able to spray some electrical contact cleaner on the button and try working it up and down and see if that will free it up. Give that a try and it should get your press running.

 

[tai]

I try the measure, but no results.