help! cd102 malfunction.

Discussion in 'Heidelberg Printing Presses' started by danniels, Jan 25, 2013.

  1. danniels

    danniels New Member

    Joined:
    Jan 2013
    Messages:
    1
    Location:
    china
    i am not good in english. i operate a cd102 offset printing.
    it occasionaly stop slowly recently when it runs. And the console displays the
    main motor brake warning sign. And must to restart the machine it can runs again.
     
  2. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    772
    Location:
    Israel
    Call a Heidelberg Electrical engineer !

    Call a Heidelberg Electrical engineer !
    Before you harm your press or the poeple working on it ....

    Go the safe way - call in for a proffesional engineer - this is the cheaper way !
    Any other way could cost much more down the road...
     
  3. exheidmech

    exheidmech Senior Member

    Joined:
    May 2009
    Messages:
    674
    Location:
    USA
    Most likely need a new main motor brake. But yes, call Heidelberg to confirm.
     
  4. nitin77416

    nitin77416 Member

    Joined:
    Sep 2010
    Messages:
    36
    Location:
    malad (w)
    try to reset your break liner or replace it , its not costly even you do it with Electrical engineer .
     

  5. Darhan

    Darhan New Member

    Joined:
    Nov 2012
    Messages:
    2
    Location:
    Kazakhstan
    Hello! I can help you, I want to work in China, I am a former employee of 10 years, Heidelberg mechanics - electronics, maybe you need to technician, my Email newsletters: d.mendikaraevhd @ mail.ru
     
Loading...