Heidelberg SM72 Symbol

Discussion in 'Heidelberg Printing Presses' started by Paul Jordan, Apr 4, 2024.

  1. Paul Jordan

    Paul Jordan New Member

    Joined:
    Apr 2024
    Messages:
    4
    Location:
    Uk
    Hi can anyone help? Does anyone know what this symbol means.
    Thanks in advance.
     

    Attached Files:

  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    539
    Location:
    Kolding-Denmark
    It's sheet arrival control on Feeder. This symbol means Feeder timing has reached to the limit.
     
    asem alsafady and Paul Jordan like this.
  3. Paul Jordan

    Paul Jordan New Member

    Joined:
    Apr 2024
    Messages:
    4
    Location:
    Uk
    Thanks for that it only seems to appear when I’m printing both sides work & turn etc…
    Does the timing need adjusting?
     
  4. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    539
    Location:
    Kolding-Denmark
    Yes, I would recommend to check the timing.
     
    Paul Jordan likes this.
  5. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    1,058
    Location:
    Vermont
    You should be able to turn off the automatic feeder timing option and manually time the feeder to the front lays on your cptronic display.
     
    Paul Jordan likes this.
  6. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    904
    Location:
    Casablanca
    do nothing, this symbol is displayed when the margin is good
     
    Paul Jordan likes this.

  7. Himanshu C

    Himanshu C New Member

    Joined:
    Apr 2024
    Messages:
    4
    Location:
    INDIA
    So if this error is constantly giving issue and is permanently showing....on the non operator side there is a chain and gear inside the cover frame below the motor. Once you open the cover below you would see a chain moving on this gear which has + and - setting on that. What it looks like is that the paper in ur case is advance so turn the gear to - direction to slower the advancement of the paper. The adjustment has to be super minor. Try this I am sure the issue would be resolved...
     
Loading...