Heidelberg SM52-4 error CP2000

[Egyhetvenhet]

Two weeks ago, we acquired a Heidelberg SM 52-4 printing machine from 2002. It was functioning flawlessly at the seller's place, but it was only later that we realized that the computer of the printing machine was kept on the printing desk, presumably for cooling purposes - we were initially unaware of this.

However, when we tried to put the machine into operation at our place, we encountered problems. Sometimes the CP 2000 program loads when starting, but most of the time the screen darkens completely even before this. We let the machine rest over the weekend, then tried to turn it on again on Monday. We managed to start it and it worked without any issues for two hours, then the screen darkened again. From then on, the machine only turns on for short periods, the program doesn't fully load, and the image disappears.

One observation we made is that it seems the longer the machine spends in rest, the longer the program loads when starting. This may suggest that the issue could be related to temperature or overload problems. We attempted to cool the inside of the computer with a larger fan, but we feel that this had no effect on the problem.

We are desperate and would like to ask for help. We greatly appreciate any advice or suggestions to help us resolve this issue.

 

[Mathew]

It's a common issue among MC2 IPCs. At some point in time, Heidelberg recalled and modified then with new generation MC3. There are two solutions, get it repaired or modify it to MC3. Remember that, the entire display panel has to be changed since the old one is not compatible with MC3.
Good luck

 

[Egyhetvenhet]

Thank you very much for your response. We would like to ask, who can repair such a motherboard, and is it possible to purchase somewhere a refurbished motherboard of this type?

 

[Egyhetvenhet]

It's a common issue among MC2 IPCs. At some point in time, Heidelberg recalled and modified then with new generation MC3. There are two solutions, get it repaired or modify it to MC3. Remember that, the entire display panel has to be changed since the old one is not compatible with MC3.
Good luck

Thank you very much for your response. We would like to ask, who can repair such a motherboard, and is it possible to purchase somewhere a refurbished motherboard of this type?

 

[PWInc]

I sell MC2 motherboard. Open the top cover and take a picture of your motherboard and the corresponding part number to be sure.
Check my website for reference https://presswares.com/?s=Cpu

Regards,
Presswares Inc

 

[Egyhetvenhet]

MC2 alaplapot árulok. Nyissa ki a felső fedelet, és készítsen egy képet az alaplapról és a megfelelő cikkszámról, hogy biztos legyen.
Nézze meg a webhelyemet a hivatkozásért : https://presswares.com/?s=Cpu

Üdvözlettel,
Presswares Inc

Dear PWInc!
Can it be determined from the photograph what exact motherboard I have?

 

[PWInc]

I have this E80-0046503 P6 Slot CPU for CP2000. Check your inbox for the price.

 

[Matekser]

If you can't solve the problem, you can contact me.

samet.sinemce@gmail.com

 

[Adil]

Please give me the picture of cp2000 when you have a problem , it give bios page or what ??

 

[ashok kumar]

Hi
You can also buy new ipc(used one or Chinese) and it will work