Heidelberg SM102 90 error

[Jurij Pavlovic]

90 error,help

 

[Steve F]

https://www.colorprintingforum.com/threads/cd-102-cptronic-error-90.12064/

 

[Jurij Pavlovic]

Thanks for the help, we have transistors on the control board of the main drive, but after replacing the error 90, the start of the main drive is blocked, the fuses are working

 

[CHOCK]

Hi sir
need to know what 1) model heidelberg is 2) and what cptronic or cpc??
and what is the error ? 90

Blessing

 

[Mathew]

As I can see in the photos, the main motor inverter board is damaged and error 90 refers a general malfunction in main electric cabinet. You have to check the error root on CP2000. Send a photo from malfunctions log from CP2000. How did it happened? During production or machine run or at start up?

 

[Jurij Pavlovic]

Good afternoon. Thank you for your interest in my topic.The car was in reserve for six months.A glitch occurred when switching on.Now I have a few days off,I will go back to work to write more information.

 

[Jurij Pavlovic]

Here is a photo of the errors:

 

[Jurij Pavlovic]

Error

 

[Jurij Pavlovic]

Good afternoon sir. The second driver was delivered to us yesterday. We replaced it, but it didn't help.

 

[Mathew]

Is it a new drive which is delivered yesterday?
Can you send errors from DYN test?

 

[Jurij Pavlovic]

Ok

 

[Adil]

Press this button and send me the picture, I will direct you to the solution

 

[mehrshad]

Hello,

I got error number 90 and 91 on my Heidelberg SM 52-2 year 2010 machine.

Please help me to fix this error.

Thanks

 

[CHOCK]

Test all Limit switch or sensors for guards system, for loose cables, oil, bad contacts. or faulty or lack of voltages.

or broken cables.

Let me know, sincerely. Happy New Year.

 

[Pawel Eurodruk Poland]

hello Where can I post to get an opinion on the cd 102, XL 105, XL 106 machine in the option of each 6L or 6L UV.

 

[Adil]

Hello,

I got error number 90 and 91 on my Heidelberg SM 52-2 year 2010 machine.

Please help me to fix this error.

Thanks

Hi sir
The origin of all those error is the safety gard on the second printing unit , you must fix the issue like chock told you , perhaps a limit switch broken or dirty
Then switch off the machine and run again
The plausibilty issue is the origin

 

[Adil]

hello Where can I post to get an opinion on the cd 102, XL 105, XL 106 machine in the option of each 6L or 6L UV.

You can do a new thread on heidelberg machine , ask as you like i will guide you , I am preparing descriptions of the options and characteristics for each machine and each brand, in the future stay tuned

 

[fahrifinoza]

Press this button and send me the picture, I will direct you to the solution

any solution for this error
i have same error
need help
thanks

 

[CHOCK]

Hi Sir:

What is the problem?

Blessing.

superchock@yandex.com

 

[fahrifinoza]

Error 90