Heidelberg QM 46 Side Cover

Take a picture of the casing from the inside, very interesting.

 

Wow!
Does the spare parts catalog indicate the number of bolts 2, 4, 5?
Exactly! The position 6 plugs cover the crane attachment points, this thing must weigh a lot!
I worked very little with Heidelberg, 102 Speed Master loaded into the printing shop, 52 Speed Master unloaded from the printing shop, Stitchmaster CT-100 does not count. Heidelberg has its own "engineering school" with non-trivial approaches to the design of equipment. An air receiver in the form of an egg bag is worth a lot))), polymer casings. I have seen fiberglass and epoxy casings on Goss and Freccia 130 ~ 1980s, but I have not seen thick polymer.
Thanks, learned a lot!

 

Way to go Olivia

 

Wow, pre 1998 model......with a purplr cover

 

Absolutely glad for the successful work!

 

，from the picture of side cover, your powder line has a leak somewhere, if you don't print coated stock, then no need to fix

 

it could easily have a leak somewhere, but the machine also hadn't been cleaned in 4 years

 

Olivia if you have any new pesto tubing ( air line) you should replace will save you a lot of headaches.

 

where can I get the tubing from?

 

Rossmini graphic supply or phesto corp the diameter you need is printed in small type on blue hose.