Heidelberg QM 46-4 Does not see files in RIP station

Hello everyone,

As I mentioned in the title i have problem that my machine does not see files in directory d:/output/unskewed

It started when at our RIP station we re-install xp system.
Ofcourse i installed NetBeui protocol.
After install rip i set the folders as shared.
My computer name is QM_RIP1


In my starnet.bat file i can see as follows :

: startnet.bat
: batch-file to start ms-network

net stop /yes >c:\ms-net\startnet.log

net start basic /verbose /yes >>c:\ms-net\startnet.log

net logoff /yes >>c:\ms-net\startnet.log

net lgon QM_PRES1 /savepw: yes >>c:\ms-net\startnet.log

net use /presistent:clear /yes >>c:\ms-net\startnet.log

net use f: \\QM_RIP1\BITMAP /presistent:no >>c:\ms-net\startnet.log
net use f: \\QM_RIP1\BITMAP /presistent:no >>c:\ms-net\startnet.log

NET TIME \\QM_RIP /SET /YES

and my startnet.log is as follows :


Error 2184: The service has not been started.


Microsoft Protocol Manager version 2.2
Intel 82557-based Ethernet PCI Adapter v2.02 022097
Copyright 1995-1997, Intel Corporation. All Rights Reserved.

Microsoft NDIS 2/3 mapper, Copyright (C) Microsoft Corporation 1993-1994

Microsoft Netbind version 2.1
Microsoft NetBEUI version 2.2
Microsoft Basic Redirector v. 1.01
Copyright(c) 1993-1994 Microsoft Corporation
Loading PROTMAN.DOS... (HIGH)
Loading e100b.dos... (HIGH)
Loading NDISHLP.SYS... (HIGH)
The command completed successfully.
QM_PRESS1 was logged off successfully.
The command completed successfully.
The command completed successfully.
The command completed successfully.

Error 85: The local device name is already in use.


Error 85: The local device name is already in use.

Also when i use command in QM dos net view \\QM_RIP\ i see

Shared resources of \\QM_RIP1

Share name Type Comment
Jobs Disc Base jobs folder
Output Disc
SharedDocs Disc
unskewed Disc
Workflows disc
xipbg_kgnh-e disc

I think thats all that i can say
I have read all simmilar theards at this forum and didn't found solution.

I will be greatfull for quick response and any help in this case.

 

You did not mentioned how you called the shared folder (should be BITMAP)

 

What does it mean ?

I shared folders output and unskewed.

Did i should rename output to BITMAP ?

When i tried to rename output folder to BITMAP there is communique something like access denied ..

 

No, just share name should be: BITMAP
rgds
Jan

 

I don't know why but i can't change share name from Output to BITMAP
i can't change anything in name even delete it

 

Okey, I already fix this problem
The problem was in share name
I just copy the Output folder, delete the old one and in new one i was able to change share name to BITMAP and now it works fine.

Thanks fall for help.

 

Is no necesarry bitmap... you can put any folder for output... is from delta, in coontrol you select the output file or mapping...