Heidelberg MOZ 2 color cp-tronics Model 611359

[raf786]

Hi
I have a Heidelberg MOZ 2 color cp-tronics and after diagnosis it has been found that the circuit board has blown. Doesanyone have any idea where i could purchase the circuit board or the whole unit, or repair as it is my only two color machine which has been offline for months.

I've been looking everywhere to find parts for this machine but seems an impossible task. Any help would be much appreciated or who to contact.
Thank you for your kind consideration

MRaf

 

[wunmi-50]

CD 102 CTPronic Issue.

Hi,
Your machine has two units of the SBM electronic units shown on your pictures.Are the two of them defective?What actually got blown on the board? as this is not clear to me in the picture.
What errors are shown on your machine CPTronic screen whilst it was powered on?

Is your machine currently operational?Kindly address these so we can know next line of action.

Wunmi-50

 

[presselectronics]

I do not know this company but they do offer an exchange of your board
http://www.tec-press.com/CircuitBoards_CPTronic2.html

Or have a local Electrical tech repair? Does not look very hard to fix. . .

 

[wunmi-50]

Hi,
Repairs on the SBM Board for MOZ in the above Thumbnail refers:
Does anyone have stock of the small brown matching transformers on this board OR kwows of any source from where i could purchase them or their euvalent?
The same goes for the green types used on the SBMs for the Speedmasters.
Thanks for an anticipated information and assistance.

Wunmi-50

 

[NotAGooner]

I don't think an MOZ has a CPTronic screen, at least mine didn't?

 

[PDPRINTUK]

Hello..is it just the board on picture 3 that is damaged or is the unit in picture 2 blown too?.. What happened to cause the damage or is it just age/wear and tear?.am i correct in saying the unit is in the bottom of the left side of the cabinet.cheers,paul..

 

[superteto]

reach me:ercupa@netscape.net

superteto

 

[wunmi-50]

Hi NotAGooner,
There are MOZs with CPTronc Screen attached to the delivery unit as shown on attached thumbnail above.
Hi PDPRINTUK,
What i need are the brown matching transformers on the SBM board that is burnt in pic3 and as such i need to source it now.Thanks.
Wunmi-50








uu

 

[superteto]

i need 3 things

1) your email

2) MODELO EXACTLY + SERIAL NUMBER

3) THE PART NUMBERS

Otherwise, will be impossible to quotate

superteto

my email ercupa@netscape.net

 

[BALAS]

If you did not get solution to the machine, I can remove you your cards and automate your machine. Simple solution and sustainable

+225 09016639