Heidelberg GTO feeder issue

Discussion in 'Heidelberg Printing Presses' started by SAICPRINT, Mar 10, 2015.

  1. SAICPRINT

    SAICPRINT Member

    Joined:
    Feb 2014
    Messages:
    44
    Location:
    Chicago
    Hello,
    I had another thread here where machine would not run at all turns out
    it needed 575 v (Canadian Motor/press) had to buy a transformer.
    The delivery limit switch was also busted so it was bypassed temporarily in
    the electrical box till my switch comes in.
    Now the paper will not feed.
    When I put the machine on Run D11 engages then disengages
    when the paper feed (without dampening) switch is turned on.
    If I take the hose off the sucker bar you can feel suction when on Run,
    then switch to paper feed nothing.

    This is a 1981 GTO52 N single color w/ kompac NO perfector

    Any help appreciated.
     
Loading...