Heidelberg Engineer offering my services

heidelbergengineer

New Member
Joined
2011
Posts
1
Geo
United Kingdom
Hi everyone, my name is Paul and I'm a 23 year old independent Heidelberg engineer based in Wakefield, West Yorkshire, I work with my Dad at J&P Graphics international.

I'm not spamming the forum with this message but simply want to let everyone know that I'm here and willing to help. I'm not on-line much but my mobile number is +44 (0) 7887 952 168 - please contact me any time with Heidelberg technical problems, I help a lot of printers all the time over the phone (for free of course). :)
 
  • I am Sir!!!!! ;-)
     
    Hi everyone, my name is Paul and I'm a 23 year old independent Heidelberg engineer based in Wakefield, West Yorkshire, I work with my Dad at J&P Graphics international.

    I'm not spamming the forum with this message but simply want to let everyone know that I'm here and willing to help. I'm not on-line much but my mobile number is +44 (0) 7887 952 168 - please contact me any time with Heidelberg technical problems, I help a lot of printers all the time over the phone (for free of course). :)

    Hello,

    CD-102 service manuals? would really appreciate any help you give.

    waqas_darkworks@hotmail.com
     
    We currently have a Heidelberg Topsetter 74 plate outputter. Just two days ago a warning appeared which said "Exposure Head Error - A command was sent to the exposure head but no answer was returned". This problem got progressively worse and we are now unable to output SM52 plates. I have to add here that we are still able to output other sizes of plate and that this problem is confined to SM52 plates. An engineer attended and was unable to narrow down the problem and we now face the expense of replacing ever more expensive parts until the problem is resolved. If anyone has experienced this problem before I would most definitely welcome their advice. Many thanks.
     
    be possible to give me the information on which to stretch the tension of the cauchus speedmaster 52, 74 to 102 and 52 Gto.

    thanks
     
    Hi I have a problem, I have an Heidelberg SM52 4col, my feeder table will not lower, it would go up but not down, it is now at its highest point. Have you any ideas please.
     
    check your quick change auxillery pile, make sure its centered. Its easy to press the button by accident its next to your main pile button.
     
    Auxillery pile on an SM52 ??
     
    Hi Paul,

    Thank you...

    I have a Toko small offset machine.

    It has been running good for past 10 years. I bought it pre owned from Auz.

    1. streaks of bearing marks appear on printed sheet starting from the middle of the sheet.

    2. The Normal inks have started accumulataing on the damper rollers, resulting in poor inkflow.

    3. The machine began to run in stagger. that is the speed would vary from 5,000 to 3,000 aproximately, I could make out by visual observation and sound.

    I tried to solve the problem by
    1. checking and replacing carbon brushes.
    2. Rechecking the control cabinet boards, All are showing the green led's properly, got the boards, rechecked by electornic engineer, (not heidelberg ofcourse) everything seems to work.
    3. finally I checked the motor and motor brake machinism.

    result : the brake machinism has two screws that can be adjusted to operate the lever. I loostened them. The motor runs continuously for 5-10 seconds at higher speed, 9,000 and stops immediately, but the counter reduces from 4,500 or 5,500 and stops at 55 after the machine has stopped.

    Can you help : kindly email to sunprints_india@yahoo.co.in

    Thanking you,

    with warm regards,
    Keshava Murthy
    Sunprints
    +91 94480 67224
    email : sunprints_india@yahoo.co.in
     
    Hi Paul,

    I have a Speedmaster CD102 with the CP2000 centre.
    We have been unsuccessfully trying to get a sheet count reading from varying parts of the press to connect to an external program via a relay for both good sheets and also total sheets.

    The correct count somehow gets to the CP2000 console for both these counts.

    Do you, or anyone know how to either tap into this counter, or what outputs on the press send this information, that again I can tap in to.

    Any help would be appreciated.

    Cheers,

    Andrew.
     
    Hi there
    I have a problem with a gto 52 zps
    when the paper is being delivered some times half a sheet sticks to the blanket
    I cannot find any setting to adjust the delivery grippers
    hope you can help
     
    hi there.

    i have a heidelberg kors. just yesterday. when i was running a full color job. i noticed an uneven distribution of ink on the upper portion of the poster im printing. could anyone tell me the cause of the problem.

    to further elaborate. the uneven print looks all the same from the first copy to the 500th copy of the poster im printing. i replaced it with a new blanket.
    ive swaped those swappable rollers underneath. but the output are all the same.

    also does anyone here have a operation and service manual. for my heidelberg kors and kord. we bought it second hand. and it doesnt come with a manual.

    thanks
     
    hi there.

    i have a heidelberg kors. just yesterday. when i was running a full color job. i noticed an uneven distribution of ink on the upper portion of the poster im printing. could anyone tell me the cause of the problem.

    to further elaborate. the uneven print looks all the same from the first copy to the 500th copy of the poster im printing. i replaced it with a new blanket.
    ive swaped those swappable rollers underneath. but the output are all the same.

    also does anyone here have a operation and service manual. for my heidelberg kors and kord. we bought it second hand. and it doesnt come with a manual.

    thanks
    Have you checked your cylinders for damages?
     
    hi there.

    thanks you very much for replying. We did check the rollers and the cylinders. everything seems to be okey. i might be missing something or have overlooked something.
     
    Last edited:
    Hi, I am from the Philippines. We have a CD102-6 with CP2000. Recently there is a warning of carbon brush on the cp2000, which we replaced all the carbon brushes but the warning remains. Is there a procedure or way to reset this warning? Please help.
     
    Hi,
    I am in the process of buying a used Heidelberg GTO52 to start a small printing press in kenya, ideally i would prefer either a 2 color or 1 color depending on my budget which i might say isn't much. What your advice on buying used equipment particularly in UK. I look forward to hearing from you.
     
  • i would say , i most cases a 2 color would be better then one color....
    But as you said... budget...

    What is your budget ?
     
    Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
    Back
    Top