Heidelberg cylinder training manual or video

Discussion in 'Heidelberg Printing Presses' started by maverick1971, May 5, 2012.

  1. maverick1971

    maverick1971 Senior Member

    Joined:
    Jul 2011
    Messages:
    140
    Location:
    South Africa
    Hi,
    Can anyone assist with a training manual or training video for a Heidelberg Cylinder KSB? Any assistance would be appreciated.
     
  2. rossio

    rossio Senior Member

    Joined:
    Jul 2009
    Messages:
    159
    Location:
    Baltic Sea,Germany
    Hi,
    end of sixtees I did my first steps in printing at Heidelberg Cylinder. From that time I know that Heidelberg published "winke für den Maschinenmeister"
    Tipps and hints for printers. But don´t know if it were published in english too. Hard to get training for old machines. Video was a foreign word, only some movies on youtube today. Apprenticeship during 3 years....not only few days training. Wish I could help you, but SA is far away.:cool:
    Good luck, Rossio
     
  3. LLS northwest uk

    LLS northwest uk Senior Member

    Joined:
    Nov 2011
    Messages:
    93
    Location:
    Northwest UK
    we had a manual for them I will see if I can dig it out for you
     
  4. maverick1971

    maverick1971 Senior Member

    Joined:
    Jul 2011
    Messages:
    140
    Location:
    South Africa
    Thank you! Any assistance would be greatly appreciated.
     
  5. NotAGooner

    NotAGooner Senior Member

    Joined:
    Dec 2007
    Messages:
    266
    Location:
    UK
    I ran one years ago, any specific questions you have?

    Sorry, I don't have the manual.
     
  6. offset005

    offset005 Member

    Joined:
    Jun 2012
    Messages:
    21
    Location:
    Dubai
    For video try on YouTube.
     
  7. superteto

    superteto Previous User

    Joined:
    Feb 2014
    Messages:
    50
    Location:
    no
  8. maverick1971

    maverick1971 Senior Member

    Joined:
    Jul 2011
    Messages:
    140
    Location:
    South Africa
    Hi Superteto

    Thank you for your post. I have sent you an e-mail.

    Regards

    Shawn
     
  9. NotAGooner

    NotAGooner Senior Member

    Joined:
    Dec 2007
    Messages:
    266
    Location:
    UK
    What issue or procedure do you need help with?
     

  10. MRFIXIT

    MRFIXIT Senior Member

    Joined:
    Aug 2014
    Messages:
    43
    Location:
    U.K.
    HELLO..I HAVE GENUINE COPY OF K-LINE CYLINDER OPERATION MANUAL(RED BOOK) AND ALSO THE HINTS AND TIPS FOR PRINTERS MANUAL..I HAVE OPS,PARTS,SERV MANUALS FOR PRESSES FROM THE OLDER PLATENS(T/GT-WINDMILL), K-LINES(OFFSET+LETTERPRESS), S-LETTERPRESS CYLINDERS, GTO, MO, S-LINE, SPEEDMASTERS, AND THE MODERN PRESSES...CONTACT pressfixt@gmail.com THANKS....
     
Loading...