heidelberg cylinder blocked

Discussion in 'Heidelberg Printing Presses' started by Rui Bandeira, Feb 5, 2018.

  1. Rui Bandeira

    Rui Bandeira New Member

    Joined:
    Feb 2018
    Messages:
    2
    Location:
    Portugal
    Hi all
    i was using my heidelberg cylinder today and the cylinder stoped and doesnt move anymore
    i cant seem to make it moving again.
    Anyone can help me on any idea?
    Thank you
     
  2. mantman

    mantman Senior Member

    Joined:
    Nov 2015
    Messages:
    103
    Location:
    Greece
    Any gates that slightly moved and left a tad bit ajar? Can you move it by hand? Try to turn one or two revolutions by hand and see if it unlocks
     
  3. Rui Bandeira

    Rui Bandeira New Member

    Joined:
    Feb 2018
    Messages:
    2
    Location:
    Portugal
    ive tryed to move the motor weel by and but it doesnt move :-(
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    822
    Location:
    Managua
    Hi sir
    Good day
    When you says heidelberg cylinder you refer to Letterpress Machine?
    Let me know for help you.
    Blessing
    superchock@yandex.com
    cell+WhatsApp:+50588611441
     
  5. Abhi

    Abhi Member

    Joined:
    Mar 2017
    Messages:
    84
    Location:
    Nepal
    Was the machine in impression when it stopped suddenly?
    If you move it by hand, do the following:
    1) Trip the main off, i.e. no power goes into the Machine.
    2) Move the red handle to running position.
    3) Try moving the machine by hand.

    If successful, let me know and I will guide you further.
     

  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    822
    Location:
    Managua
Loading...

Share This Page