Heidelberg CD-74 2006 GRAFIX Powder Spray Device Error !!

Discussion in 'Heidelberg Printing Presses' started by NAGHSHE_BARTAR, Dec 30, 2015.

  1. NAGHSHE_BARTAR

    NAGHSHE_BARTAR Member

    Joined:
    Dec 2014
    Messages:
    21
    Location:
    TURKEY
    When i start the operation, the machine stop working after print about 70 sheets,shows this error

    [​IMG]

    Then i have to press start print button again an again until the said error disappear.
    I know this error Relates to the compressor However It's Weired that the barometer is in green zone

    [​IMG]

    I'll be thankful for any help about issue.
     
  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Well, it's a little strange. But if barometer shows Green area and you still have insufficient compressor pressure, you can short the pressure sensor wires on the left side, lay under a black plastic cover. Just connect the two wires and check the result.

    Good luck,
     
  3. NAGHSHE_BARTAR

    NAGHSHE_BARTAR Member

    Joined:
    Dec 2014
    Messages:
    21
    Location:
    TURKEY
    thanks MR.MATHEW

    this error is disapperar
    so pressure switch is defective and I repair
     
Loading...