Heidelberg CD 6 + LX 1994 Pile Problem

Discussion in 'Heidelberg Printing Presses' started by Pradip Jha, Sep 21, 2022.

  1. Pradip Jha

    Pradip Jha Member

    Joined:
    Feb 2018
    Messages:
    10
    Location:
    India
    Hi Expert,
    I have one issue on Heidelberg CD 6 + LX 1994, Feeder and Delivery is not working, when i press the pile button it show error in DYN Test HAK - 7FDF.
     
  2. Michael Lee

    Michael Lee Member

    Joined:
    Sep 2022
    Messages:
    69
    Location:
    NJ
    make sure your press model number is correct, it is CD102 or CD74.
    please post your press initial test and dny test images with your camera, that way we can analyze the cause.
    thanks!
     
    Last edited: Sep 23, 2022
  3. Pradip Jha

    Pradip Jha Member

    Joined:
    Feb 2018
    Messages:
    10
    Location:
    India
    It’s Heidelberg CD102, 82A6845F-ECFB-44DD-87DE-5F6C86CDF160.jpeg 82A6845F-ECFB-44DD-87DE-5F6C86CDF160.jpeg
     

    Attached Files:

  4. Michael Lee

    Michael Lee Member

    Joined:
    Sep 2022
    Messages:
    69
    Location:
    NJ
    make sure plugs for water roller motors at printing unit #1 and #4 connected properly.
     
  5. Michael Lee

    Michael Lee Member

    Joined:
    Sep 2022
    Messages:
    69
    Location:
    NJ
    check 4 LTK500 boards are sitting properly.
    [​IMG]
     
  6. Pradip Jha

    Pradip Jha Member

    Joined:
    Feb 2018
    Messages:
    10
    Location:
    India
    All unit Dampening and Suction motor work fine.
    when I press pile button, LTK500 led goes off for a second and sound come from motor but not rotate.
     
  7. Michael Lee

    Michael Lee Member

    Joined:
    Sep 2022
    Messages:
    69
    Location:
    NJ
    did you check feeder main pile brake coil and delivery main pile brake coil resistance?
     
  8. Michael Lee

    Michael Lee Member

    Joined:
    Sep 2022
    Messages:
    69
    Location:
    NJ
    how about auxiliary pile at feeder, did it work?
     
  9. Michael Lee

    Michael Lee Member

    Joined:
    Sep 2022
    Messages:
    69
    Location:
    NJ
    if you have auxiliary pile at feeder, you can swap STK1 and STK2 board, see what happens.
    Strong recommended, resitting all HAK2 boards, and swap first two HAK2 boards from the last two HAK2 boards.
     
    Last edited: Sep 22, 2022

  10. Michael Lee

    Michael Lee Member

    Joined:
    Sep 2022
    Messages:
    69
    Location:
    NJ
    are you ok? please say something, I am trying to help you, if you think i am not professional, many more professionals can help you. what is the matter with you?
     
    asem alsafady likes this.
Loading...