Heidelberg 74-2 2005

Alistair Tinsley

Senior Member
Could someone please advise me on the procedure on how to remove the airlock from the blanket wash device tank.
It run low now it says it has no pressure etc.
I think it is airlocked.
The machine is fairly new to me.
Help appreciated
 
Hi sir:

Follow this procedure:

1. Demount the wash cartridge.
2. Loosen the Allen screws on the
D.S. and O.S..
3. Move the spray tubes towards the
D.S.. This loosens the hoses for the water and
washing fluid .
4. Carefully remove the spray tubes from the
press.
Warning – Risk of injury when cleaning
the spray tubes
Wear protective glasses and protective
gloves for the following work!
5. Clean the spray tubes (look his operating
manual).
see and tight clamps, and any loose parts.

 
  • Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
    Back
    Top