H/Berg technotrans multi com SM74

Discussion in 'Heidelberg Printing Presses' started by anthonywheeldon, Oct 3, 2019.

  1. anthonywheeldon

    anthonywheeldon Member

    Joined:
    Sep 2012
    Messages:
    36
    Location:
    UK
    Hello


    I have recently replaced a multi com in the Technotrans of a Heidleberg SM74. The part cost $8000 for new unit as I did not have time to get the unit fixed. I want to sell on the previous multi-com that didn’t work either as it is or fixed. Can you offer any advice here please?
     
  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    253
    Location:
    Kolding-Denmark
    Hi,
    It depends on the failure, can you explain more about the problem it's got?
     
  3. anthonywheeldon

    anthonywheeldon Member

    Joined:
    Sep 2012
    Messages:
    36
    Location:
    UK
    Hi Mathew, here is the feedback from the engineer;

    1.)10k1 multicom it-co power+5v problem 2.)check bord 11k1 for connection 3.)check power supply+24v 4.10k1 multicom it-co can't run the singnel to 11k01 5).11p1 can' t but power supply+5v problem wite x1 plug
     
  4. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    253
    Location:
    Kolding-Denmark
    Hi,
    It's very strange explanations. Can you all and discuss on the phone?
     
  5. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    253
    Location:
    Kolding-Denmark
    Hi,
    It's very strange explanation. Can you call me and discuss on the phone? Here is my number +45 6022 5546
     
  6. anthonywheeldon

    anthonywheeldon Member

    Joined:
    Sep 2012
    Messages:
    36
    Location:
    UK
    Hi Mathew I can arrange. The press is in Bangladesh one of our regions. I am UK based.
     
  7. anthonywheeldon

    anthonywheeldon Member

    Joined:
    Sep 2012
    Messages:
    36
    Location:
    UK
    Hi Mathew its not really possible to get the outsourced engineer in Bangladesh. I can speak with you. Do you know of a solution for someone to look at the part and see if we can trade it on?
     

  8. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    253
    Location:
    Kolding-Denmark
    Can you send a photo from Multicom display?
     
Loading...