Guys need help as been stuck with old problem

[Raju]

Optical density value 3.45 out of range in secondary channel perform full densitometer callibration if still error occurs replace inline densitometer
Activity done
1. ILD replaced
2.MCN replaced
3. Ink rebuild CMYK
4. Full ild calibration done value accepted by the device
But error remains the same ...In full and short color calibration
You can help me at rajukanojiya@gmail.com...Or whatsapp at +919810689766

 

[rolermanto]

Hi,
Wich color is out of range?
Check the voltage on ILD

 

[Raju]

It's the od value of paper out of range it varies from 3.45 to 4..0 and stopped calibration..