GTP reassembly help

Discussion in 'Heidelberg Printing Presses' started by rich8606, Jun 11, 2022.

  1. rich8606

    rich8606 Member

    Joined:
    Feb 2013
    Messages:
    14
    Location:
    Indonesia
    We recently disassembled, repaired and repainted our GTP, which we haven't used for almost 30 years. We're planning to use it for die cutting.

    We've reassembled the machine except for this one part, which we completely forgot where it originally was attached to.

    Can anybody tell me what this is and where it's supposed to go? Thanks.
    [​IMG]
    [​IMG]
     
  2. Mehanka Abortmaher

    Mehanka Abortmaher Senior Member

    Joined:
    Apr 2022
    Messages:
    147
    Location:
    Russia
    I thought that you carefully examined the car for the missing adjustment. It is also not entirely clear whether the shaft is broken.
     
  3. rich8606

    rich8606 Member

    Joined:
    Feb 2013
    Messages:
    14
    Location:
    Indonesia
    We found out, it's the stopper for the delivery table.
     

  4. Mehanka Abortmaher

    Mehanka Abortmaher Senior Member

    Joined:
    Apr 2022
    Messages:
    147
    Location:
    Russia
    Well, after repairing the handle, your car will be as good as new :)
     
Loading...