Gtov 52 error

Discussion in 'Heidelberg Printing Presses' started by Eric.K, Nov 19, 2014.

  1. Eric.K

    Eric.K Member

    Joined:
    Aug 2013
    Messages:
    43
    Location:
    NAIROBI, KENYA.
    Hi guys,I have a red Light on at the feeder panel of the GTOV 52,the machine cannot run but can inch both directions,the machine was in production when it suddenly stopped then the error light(read red) came on,there are no faults in the printing units as their corresponding fault indicator lights are off,any ideas on the problem?
     
  2. aqazi81

    aqazi81 Senior Member

    Joined:
    Oct 2009
    Messages:
    827
    Location:
    KARACHI PAKISTAN
    Did you tried to shut down and then restart the press? Does this error goes away or not?
     
  3. MRFIXIT

    MRFIXIT Senior Member

    Joined:
    Aug 2014
    Messages:
    43
    Location:
    U.K.
    HI..IS THE DOUBLE SHEET DETECTOR SWITCH TRIPPED ON THE FEEDER..ALSO DO ALL THE BLUE LIGHT ON THE UNITS WORK OK? THE RED LIGHT ARE CAUSED BY THE FINGER BARS,DAMPING GUARDS, 2 SHEET TRIP, DELIVERY GUARD,DELIVERY PILE TRIPS AND STOP BUTTONS/SWITCHES,CRANKING HANDLE etc..
    THE GUARDS BETWEEN THE UNITS AND OVER THE CYLINDERS AND N/P UNIT ALLOW INCHING..THANKS..HOPE THIS HELPS..
     
Loading...