GTO 52 ZPS Feeder

[alastairk]

I have a gto 52 ZPS with stream feeder. This feeder seems to be very tricky
I have noticed that the paper is lifted off square to the feed table would anyone know how to set/adjust the feeder to sort this problem, I have checked the forwarding rollers for pressure and they seem okay the proble starts before the feed table and if the paper does not arrive squarely at the front lays the machine checks out and this happens frequently
I f anyone can offer help and or setting for this feeder i would be very greatful
cheers

 

[Darhan]

Hello! If you need instructions for use or repair, please contact us @ d.mendikaraevhd mail.ru

 

[rolandman]

I assume you will have checked this but make sure none of the sheet seperators are to hard on the sheet, and make sure the pile is at the right height, check the feeder head isnt too far in because that would cause the foot to hinder the sheet.

 

[NotAGooner]

Don't know if the GTO stream feeder has a cocking knob, it's a round knob on the side of the feeder head?

Maybe it's maxed out for cocking the stream?