Gto 52 with cptronic

[Ceasar rurige]

Dear members
My press does not inch either backward or forward but I hear the brake energising.
Run does not work but # alarm flashes once during start buzzer
Anyone with such experience. Note blt board has a green light on

 

[Adil]

Hi
In which unit do you have the alarms ??
And olease tell me if the macvine run and stop or she dont run anymore ??

 

[CHOCK]

Hi sir:

Measure the input voltage to the machine, if according with the specificacion of the machine.
2) See if the contactor for RUN , backward or forward, is working.

3) if NOT WORKING, measure Fuses or C. Breaker in the main power, and Reset.

4) Look if there are voltage at terminal of the Brake, if there are, the mechanical issue, you must see.

5) If you main motor is with brush or NOT, after you did the test, mentioned before, will be a Good Idea to maintenance the main motor in
shop Repair.

6) look for loose wires in the input, and fuses, and contactors.