GTO 52-4 1998 KLM 7,5 kW problem

Discussion in 'Heidelberg Printing Presses' started by Alberto Raiser, Jan 10, 2020.

  1. Alberto Raiser

    Alberto Raiser New Member

    Joined:
    Jul 2019
    Messages:
    2
    Location:
    PerĂº
    Hello colleagues ,
    we have problems with main fuses ( 16 A ) blowing every time we connect the machine and the cause is the KLM module, we are trying to repair it this weekend , but we need some technical information and schematics , maybe you can help me
    thank you in advance,
    Alberto Raiser
     

    Attached Files:

  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,457
    Location:
    Managua,Nicaragua
    Hi sir:

    This is will be impossible to find some tech documentation and schematic for this kind of electronic board.

    Heidelberg is carefully, and the same most of the factories, like: Man Roland, Komori, etc, they have BUT only for the staff, and NOT for third persons.

    I recommend you, if you have some Good electronic Engineer or Technician in his country, or others, try to fix it.

    I know some of them.

    By other side, you can buy a new one, with a Good price, can quote if you desire.
     
  3. Alberto Raiser

    Alberto Raiser New Member

    Joined:
    Jul 2019
    Messages:
    2
    Location:
    PerĂº
    Thank you very much for your answer, fortunately the card could be repaired, but I will consider you for future repairs,
    best regards
    Alberto
     
Loading...