Fuse Blowing Out - Gto-52

I Have a Problem With My Gto-52 1 Colour Machine 2001 Model .Fuse Gets Continuously Blowing In Gto 52 Machine in both K1M and in K2M

RED MARKED AREA IN PIC IS THE FUSE TRIGGERING

 

Hi Clasic Ramkumar,
Is that a new installation or did this happen sudenly? When fuses get triggered, right after you turn the main switch on or after you try to run the press.
Which Fuse is blown out:
1. Motor cirkuit braker 91-Q2M
2. 91-F3
3. Some other, which one?

First I would check all three Phases for voltage on 91-Q1 Main switch...
Good luck

 

Machine is old and it is in same place running more than 20 years,Fuse gets triggered only when machine comes to running position.....Inching forward and reverse works good.

 

Red Marked Area is the fuse triggering