zarcorp
Member
- Joined
- 2012
- Posts
- 19
- Geo
- USA
ZAR Corporation has a high quality LX561 cutter system for sale.
Buy this piece As-Is, in very good operating condition.
-- Speed 450ft/min
-- airshaft core 70mm diameter
-- Option-complete cutting line roll-2-stack
-- Made in Sweden
-- 208 V, 60 Hz, 10 A, 1200 W
Lasermax Roll System LX561 Cutter, for cutting the paper from the output of high-speed continuous digital printers. This cutter handles forms up to 18 long, in a broad range of basis weights down to 11 pound bond (40 gsm), at speeds up to 450 feet per minute.
It offers a number of features designed for system flexibility as well as ease of use. An interactive touch-screen display includes the LX500 Support System and makes the operator manual easily available on the display.
System also provides error detection with step-by-step instructions to guide in operator troubleshooting. Other ease of use features improve operator access. The cutter blade performs up to 22 million cuts between changes.
Shipping is available worldwide.
We can assist with delivery and installation.
Please ask if you have any questions.
Thank you for looking!
All equipment is staged and test prior to shipping unless otherwise specified. If however you prefer a refurbished remanufactured pre-owned Lasermax LX561 Cutter, we can provide that too!
ZAR CORPORATION
800-474-7316
612-455-4558
Fax: 1-952-516-5280
E-Mail: buy-sell@zarcorp.com
Buy this piece As-Is, in very good operating condition.
-- Speed 450ft/min
-- airshaft core 70mm diameter
-- Option-complete cutting line roll-2-stack
-- Made in Sweden
-- 208 V, 60 Hz, 10 A, 1200 W
Lasermax Roll System LX561 Cutter, for cutting the paper from the output of high-speed continuous digital printers. This cutter handles forms up to 18 long, in a broad range of basis weights down to 11 pound bond (40 gsm), at speeds up to 450 feet per minute.
It offers a number of features designed for system flexibility as well as ease of use. An interactive touch-screen display includes the LX500 Support System and makes the operator manual easily available on the display.
System also provides error detection with step-by-step instructions to guide in operator troubleshooting. Other ease of use features improve operator access. The cutter blade performs up to 22 million cuts between changes.
Shipping is available worldwide.
We can assist with delivery and installation.
Please ask if you have any questions.
Thank you for looking!
All equipment is staged and test prior to shipping unless otherwise specified. If however you prefer a refurbished remanufactured pre-owned Lasermax LX561 Cutter, we can provide that too!
ZAR CORPORATION
800-474-7316
612-455-4558
Fax: 1-952-516-5280
E-Mail: buy-sell@zarcorp.com