feeder belt on pm74

Could someone please inform me on the process of fitting the feeder belt on a PM74
I have no books that show breakdown drawings.
Help much appreciated

 

You need to loosen belt tension underneath the feed board. Look to see where old belt was glued together. Then cut old belt do Not take off attach new belt to old belt with duct tape then pull the new belt onto the feed board with the old belt.Remove duct tape and glue the new belt together.hopfully you have the belt iron and glue?

 

Unfortunately jack this is not the safe procedure , wait i will send you

 

This belt comes in single piece, no need to join. Follow picture sequence by Adil, there locking screw beneath the belt and whole unit comes out.

 

Yes naryan of corse , i think that his problem is solved .
Be welcome