Facing problem in 2 Color Komori Sprint 226 P

Hi Freinds
I have a 2 color Komori 226P Sprint 1990 model, (conventional dampening) it was working flawlessly, but these days im facing a problem, the ink does not adhere to the plates from the sides. Im based in India, these days we have a humid temperature about 25-30 degrees celsius.
I tried to change the font, and tried various things but in vain
Im baked plates, can baking be a problem for this???
Looking forward for your valued suggestions

thanks with regards

tabreek ahsan
shining international
india

 

I think you will have to better describe your problem to get any help. Posting pics might also make it easier.

 

Are your roller settings ok, are the rollers calcified.......there are many issues you could be having, you may need to give a bit more information

 

My gto 46 is picking up paper when I put it on run -- why?

 

You may have a wetting problem. Control the dampening solution (ph, conductivity)
Also check the condition of the inking rollers and dampening rollers
If you can send photos of the plate cylinder at the time of printing and printed sheets it will be better, to guide you to the solution of the problem