Error codes
- Thread starter ziggy33
- Start date
CHOCK
Senior Member
- Joined
- 2016
- Posts
- 3,125
- Geo
- Managua,Nicaragua
Hi sir:
Will be a good Idea, to RESET the CPUnwith the small button coming , in the motherboard.
2) and test the light, by other that are working, and you will see if the light or dirty, loose connector, corroded, or bad contact, or light faulty.
Will be a good Idea, to RESET the CPUnwith the small button coming , in the motherboard.
2) and test the light, by other that are working, and you will see if the light or dirty, loose connector, corroded, or bad contact, or light faulty.
Advertisement:
fahrifinoza
Member
- Joined
- 2015
- Posts
- 38
- Geo
- jakarta
Maybe roller plate holder 1st unit to hard, when push the plate, linking safety bar shaking and error appears
Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.