macradios
New Member
- Joined
- 2014
- Posts
- 1
- Geo
- Canada
I have a weird problem that I'm hoping someone may recognize a solution. When ever I run a regular print head cleaning it always
Shows missing bars usually on the last two colours on the right. If
I wait about half an hour and re run a nozzle check all of the bars appear and it prints fine. It will never show all bars after a cleaning.
Any help would be appreciated.
Thanks
Paul
Shows missing bars usually on the last two colours on the right. If
I wait about half an hour and re run a nozzle check all of the bars appear and it prints fine. It will never show all bars after a cleaning.
Any help would be appreciated.
Thanks
Paul