EAK 2 board

Discussion in 'Heidelberg Printing Presses' started by Ricardo, Feb 26, 2018.

  1. Ricardo

    Ricardo Member

    Joined:
    Nov 2017
    Messages:
    72
    Location:
    Tucson az
    13B36CF7-C214-430D-AA13-E71B911CF19F.jpeg Ricardo here. I just replace a EAK2 board in my Heidelberg and the problem got solve. But in the console one of the lights (yellow) is flashing. Any idea how to get rid of that light. The press is running.
     
  2. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    Reset circuit breakers Q02 and Q21. Power off, inside panel on back wall behind swing open door.
     
  3. alibryan

    alibryan Senior Member

    Joined:
    May 2014
    Messages:
    217
    Location:
    Somewhere
    Lift off the plastic cover and pull up on the bulb.
     
    TomPrint likes this.
  4. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    Should have seen that one coming!
     
    Abhi and alibryan like this.

  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi Ricardo:
    Hope you are well.
    Please review The componentes following:
    Flat cable or Flex for loose, or corroded or dirty contacts, clean with Electronic Cleaner contacts.
    position switches / switches / buttons S
    – pressure switches F
    – motor circuit-breakers Q
    – sensors B
    – electronic components (e.g. SEM, IWM, ...)
    ALL component are connected via Board SEK
    Let me know.
     
Loading...