Duplo DC-10000S

Hi,
Can you help me please... I have 2 towers of Duplo DC-10000S connceted to the DBM-200 an dmy problem is sheet overlapping which is too big. On the control panel I have adjusted it to minimum.
Is it a way to tune it on the motheboard or other way...?
Thanks for help

 

Hi, attached is there the min, max that you can handle in your duplo machine DC10000S
Min.140 ´ 200 mm
Max.350 ´ 500 mm
Feeding widht 200 to 350 mm
Feeding length 140 to 500 mm
(Minimum feeding width is 120 mm, only when connected DBM-200)

Attached is there how to adjus the DIP switch the Main board

Good luck

Blessing