Drytronic

User 22170

Member
Joined
2019
Posts
12
Geo
Indonesia
Error :
TA-alarm-temp.reached
TA-temp.-sensor,no contact
Pile-temp.-sensor,no contact
 
    • Take a screenshot of the error messages, please. What machine is it, what year, what series?
    If I guessed correctly, the infrared thermal sensor above the delivery pallet.
     
    17654288819405017892863134962534.jpg
     
    User 22170 said:
    What is meant by the sensor located above the paper delivery pile?
    Click to expand...
    There is a sensor in the delivery unit for pile temperature control which is controlled by dryer system to maintain temperature of printed sheets on delivery pile. You need to check that sensor and its control through to the dryer panel.
    The sensor is located right over the pile within blast frame
     
    Don't break the machine. At least learn the basics.
    Tarm2.jpg
     
    IR sensor electronics box is under the lid of the delivery, A side, external
     
    • It's impossible to help you. You're not an electrician. You don't know the machine even at a basic level.
    First, repair the IR sensor.
     
    You must log in or register to reply here.
    Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
    Back
    Top