Delivery air sheet transfer set up. HELP.

Discussion in 'Heidelberg Printing Presses' started by printerscd, Jan 20, 2013.

  1. printerscd

    printerscd Senior Member

    Joined:
    Oct 2012
    Messages:
    90
    Location:
    Europe
    Hello.

    With each new first job, mashine Heidelberg sm 102-8 change travel sheet air delivery, we dont know why.

    Its possible adjust so to stay always as we want ? We do not know why still change to heidelberg sdandart settings.

    I attached foto: http://imageshack.us/photo/my-images/255/19012013214.jpg/

    Thanks !
     
    Last edited: Jan 20, 2013
  2. nitin77416

    nitin77416 Member

    Joined:
    Sep 2010
    Messages:
    36
    Location:
    malad (w)
    for this need to check with operating books . some time i think its easy to work with little old age machine . try to find out from operating books.
     
  3. Borut

    Borut Member

    Joined:
    Oct 2008
    Messages:
    33
    Location:
    Slovenia
    Hello
    if you change the thicknes of the sheet the air is changing in feeder,
    delivery and in printing unit because you have a machine with preset.
    After finishing of printed sheet and saving it, on cp2000 you switch
    on and off what you would like to copy from the last job. If you have some special papers you can save the name, thicknes,format, any what kind of paper and after saving your air adjustment stay the same

    regards
    Borut
     
Loading...