DC242 Lots of spilt black toner Yuk!

Discussion in 'Xerox Digital Presses' started by paul@wdpcommunications, Sep 23, 2015.

  1. paul@wdpcommunications

    paul@wdpcommunications Member

    Joined:
    Jun 2014
    Messages:
    19
    Location:
    pinner
    Getting repeated spill of black toner throughout machine. Usually ends up with a BTR sensor fault, assuming due to dirty patch or sensor. Black toner seems to be spilling either from toner cartridge area itself (new cartridges tried) or the black dev tank area.

    any ideas of a cause to look at?? Have had dev tank out and replaced developer medium a month or so ago, but all seems to be back in place correctly and working. Could it be a badly fitting something or other on refit? Does there come a point where the dev tank itself needs replacing? Do A LOT of black work through machine.

    As always comments/support welcomed.

    Just going to check filters all functioning and clear...
     
  2. InterfaceP

    InterfaceP Senior Member

    Joined:
    Sep 2013
    Messages:
    189
    Location:
    Dallas, TX
    Check the developer cover, it should have a clear plastic piece that runs the length of the dev housing, that acts like a curtain. Otherwise the drum waste removal may be clogged.
     
Loading...