Dark prints with correct CMYK patches

Discussion in 'Color Management' started by vanceibz, Mar 22, 2023.

  1. vanceibz

    vanceibz Senior Member

    Joined:
    Apr 2015
    Messages:
    136
    Location:
    spain
    I am having issues either with our plate imaging, RIP settings or press .. Not sure where to start troubleshooting.

    I am reading with a calibrated densitometer patch readings that are in tolerance.. but the overall print is way too dark.

    Any advice appreciated.
     
  2. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    922
    Location:
    Casablanca
    Some picture please
     
  3. vanceibz

    vanceibz Senior Member

    Joined:
    Apr 2015
    Messages:
    136
    Location:
    spain
    We solved the problem . We had an incorrect dot gain. we calibrated the RIP with a second hand techkon DMS 910 and all looking good. Thanks
     
Loading...