Cutter Wohlenberg MCS 2 TV 115

Discussion in 'Cutters and Trimmers' started by lavazza, Oct 21, 2016.

  1. lavazza

    lavazza Member

    Joined:
    Oct 2016
    Messages:
    6
    Location:
    France
    Hi,

    I recently had problems with the memory of the motherboard : the battery died.
    Symptoms are common for this case as I could read :
    - Weird characters on description of programs
    - Editing programs is impossible ( no page change )
    - Gauge doesn't travel the whole distance in manual mode ( blocking around 495 mm )

    I changed the battery ( Varta 3 / V 250 H SK SC PCBD ) but actually I encouter all of these symptoms above.
    I only own the user manual but inside ther is no information about setting up the parameters, only the language setting with F5.

    Does somebody have information about it please ?
    Thanks in advance, and sorry for the same question I asked in another thread which was no mine.
     
  2. lavazza

    lavazza Member

    Joined:
    Oct 2016
    Messages:
    6
    Location:
    France
    Hi,

    I still have the problem, could you please help me ?
    Here's my e-mail : lavazza1977@gmail.com

    Regards.
     
  3. lavazza

    lavazza Member

    Joined:
    Oct 2016
    Messages:
    6
    Location:
    France
    Problem solved thanks to NimeshSilva !

    Thanks !
     
  4. NimeshSilva

    NimeshSilva Senior Member

    Joined:
    Jan 2013
    Messages:
    219
    Location:
    Sri Lanka
    My pleasure.
     
  5. dahmanus

    dahmanus New Member

    Joined:
    Feb 2018
    Messages:
    2
    Location:
    algeria
  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    662
    Location:
    Managua
    Hi Sir
    Good day
    What do you need with Wohlenberg ?
    What can i do for you?
    Let me know
    Blessing
    superchock@yandex.com
    cell+WhatsApp:+50588611441
     
  7. Bepsa

    Bepsa New Member

    Joined:
    Sunday
    Messages:
    3
    Location:
    Spain
    Hi everyone. We have a Wohlenberg MCS2-TC cutter since few years and it have worked fine. But last week it started to behave in a strange way, the same as other members have mention:

    · Battery is completely wasted
    · Editing programs is impossible ( no page change )
    · Gauge doesn't travel the whole distance in manual mode ( blocking around 495 mm )

    We have exchange the battery but now we have other issues: we are not able to enter setup screen in order to enter basic parameters, and we really don’t know what are these basic parameters. In the user manual it doesn’t explain these procedure. Can Anyone post some help. Thanks in advance!!
    Board.jpg
     
  8. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    662
    Location:
    Managua
    Hi sir
    Hope you are well
    Please understand this situation, read carefully
    machine logic (PC) controls alf functions of the machine,
    The heart of the PC is the printed circuit board PCU (programme
    control unlt), with the 1-bit micro processor MC 14500.
    All informations, positions of switches and auxiliary contacts
    of contactors are transferred via I/o-ports to the PCU.
    All input
    conditions can be checked on Red LEDs at the front edge of
    the I / o - p o r t s .
    All infornations informations from the PCU to the machine are transferred
    via I / o - p o r t s and can be checked at green L E D s .

    Those output informations are transferred to printed c i r c u it
    boards PK l and PK 2 in the switch cabinet. There .are
    anplified and switch contactors and solenoids.
    The I/o-ports 1 - 4 and the PcU are together pIugged in into a
    mother board.
    I/o-ports 2 and 4 can be replaced by all I/o-ports, because
    there are no times needed. If a board is plugged in with a
    ti m e r , these components are n e g l e c t e d .

    I/o-ports l and 3 must not be replaced by other l / o - p o r t s .
    Even among each otner Lhey must no! be m i x e d .

    In other words, you must take test the LEDs function in the I/O ports
    what status is there, for to see whats going on in the machine.
    In introduce\ing the parameters,adjustment can be done entering in the service mode display.
    Since is 100% that you lost the parameters, when change the batteries, or the software is corrupted.
    Let me know
    Blessing
    superchock@yandex.com
    cell+WhatsApp:+50588611441
     

  9. Bepsa

    Bepsa New Member

    Joined:
    Sunday
    Messages:
    3
    Location:
    Spain
    Hi NimeshSilva,

    We are having the same problem with our Wohlenberg MCS2-TV after the battery went completely dry. Could you tell me what steps must I follow in order to setup parameters again?
    Here's my e-mail : agarcia@bepsa.es

    Thanks!
     
Loading...

Share This Page