CPL on the Man Roland 304

Discussion in 'Man Roland Printing Presses' started by Alexey, Mar 20, 2021.

  1. Alexey

    Alexey Member

    Joined:
    Mar 2021
    Messages:
    5
    Location:
    Russia
    Hi,
    We have problem with CPL system. Sometimes we got errors during using CPL system. But sometimes it working without error. What can be source of problem. Mechanical, electric, optics or wiring connection?
     

    Attached Files:

  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir;
    Please test the power supply in the CPL, if they are in tolerance according with the schematic diagrams
    2) Motor protection switch Q029+Q041
    3) WEKO control system a571.
    4) Calibration system for CPL.

     
  3. Alexey

    Alexey Member

    Joined:
    Mar 2021
    Messages:
    5
    Location:
    Russia
    Thank, I will try doing it. And addition I want replace CPL because I have the spare CPL. Maybe this action will solve issue.
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    ok

    his decision Sir

    Blessing
     
  5. drukman

    drukman Senior Member

    Joined:
    Mar 2016
    Messages:
    272
    Location:
    Bulgaria
    Use silicone spray under the plate
     
  6. Daniel.Sanchez

    Daniel.Sanchez Senior Member

    Joined:
    Apr 2020
    Messages:
    101
    Location:
    peru
    It can be source or mercotac, exchange with another body by resetting the register, in the two bodies that you are going to exchange
     

  7. Daniel.Sanchez

    Daniel.Sanchez Senior Member

    Joined:
    Apr 2020
    Messages:
    101
    Location:
    peru
    It can be source or mercotac, exchange with another body by resetting the register, in the two bodies that you are going to exchange
     
Loading...