CP2000 computer failure

Discussion in 'Heidelberg Printing Presses' started by NimeshSilva, Aug 1, 2016.

  1. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Good day sir
    Hi hope you are well
    Let me know what is his problem exactly?
    Need clarification maybe problem Hardware vs Software.
     
  2. carrel

    carrel New Member

    Joined:
    Sep 2017
    Messages:
    3
    Location:
    Lusaka Zambia
    The software dosnt detect the machine, there was a hardisk crashed then we try to clone using MC2-C-RO-05
    but the original part number of the CPU is MC2-C-RO-03
    the software is running but it cannot detect the machine just stock in CP2000 image
     
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    ok sir, do this follow steps:
    1) Use the data backup with software versions
    CP2000 V030.4, V031.0, V031.3 and
    V032.0 .you must have
    2) All files from Heidelberg are very Hard protect with software -tested by Heidelberg in order to save DATA,included some "special function check Sum" is this special function had been deleted, the software can NOT work in the Cloned CPU MC2-C-RO-05.
    3) Try to use the CPU , and see if the software is ok, then problem can be the CPU cloned NOT compatible with CPU Heidelberg(characteristic and parameter). If Not the CPU Cloned does NOT recognize the integrity "check sum" protected by Heidelberg.
    4)Another Strong possibility is the Distribution of computer Viruses in the system via 3 ways:a) files transfer b)remote services c) Shares.
    5) However you must test the power supply in Cp2000 since, you must sure the System has Integrity in all voltages power supply +5VDC+24vdc+120Vdc, Use the schematic Diagrams for Test the voltages Power S, with a Good DMM, the tolerances is very critical, 0.5% up and down, in any cases.
    Let me know any question or doubt.
     
  4. carrel

    carrel New Member

    Joined:
    Sep 2017
    Messages:
    3
    Location:
    Lusaka Zambia
    hi where i can find the backup CP2000 V030.4, V031.0, V031.3 and
    V032.0...


    I saw the backup folder in the HD:
    File_ store
    reg _store
    store


     
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Designation Part no.
    Backup CD CP.150.2718/
    Number part supply by Heidelberg CD-BACK UP, i recomend you
    that you order with that part number above.
     
  6. aniz

    aniz New Member

    Joined:
    Jul 2019
    Messages:
    3
    Location:
    dubai
    dear menny,

    i was going through your reply. i am based in dubai uae. my sm102 machine computer mother board mc3 is gone . if you can message me your mail id . i can send you pics of board also machine serial no.

    aniz bin yusuf
    aniz@westrock.ae
     

  7. Lopez Jaena

    Lopez Jaena Member

    Joined:
    Jul 2019
    Messages:
    7
    Location:
    canada
    What's symptoms did you see on your cp2000 for you to decide if it's the motherboard?
     
Loading...