Cp tronic compact sm 74 2 do not start

Discussion in 'Heidelberg Printing Presses' started by IMP.CHERIFI, Feb 12, 2014.

  1. IMP.CHERIFI

    IMP.CHERIFI New Member

    Joined:
    Feb 2014
    Messages:
    2
    Location:
    dz
    i have import speedmaster 2 colors 2000 with cp tronic compact the pupitre of reception do not start remaining show ''Heidelberg cp tronic'' the bladwin do not work..... i have tested X3 and X90 alimentation for ZSK2 cammand card is ok pls i need to change ZSK2 card or ZRM card or EPM1 modul card or there are connections must be tested first or.....? pls i need help
    [​IMG]
    [​IMG]
     
  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Hi dear
    To my experience, there is no need to change these boards. You have to make a RESET on ZSK2 and it should be done by a technician.
    Good luck.
     
  3. IMP.CHERIFI

    IMP.CHERIFI New Member

    Joined:
    Feb 2014
    Messages:
    2
    Location:
    dz
    thank you mr Mathew
    I found the battery of ZSK2 board completely discharged i replaced it, but without result ?
    i contacted by phone the technician of heidelberg they told me i must change ZSK2 and EPM1 ?
    If the problem not in board he can not return it ?
    [​IMG]
     

  4. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    I don't believe ZSK2 is defective. You can not make a reset by discharging battery. There are pins for this purpose. Ask your technician to do it first.
     
Loading...