Compressor for WEKO AP232 powdr spray system

Discussion in '4-Color Offset Presses +' started by witer30, Feb 27, 2016.

  1. witer30

    witer30 Member

    Joined:
    Jul 2014
    Messages:
    16
    Location:
    Poland
    Hi,
    I have KBA Rapida 74 with powder spray WEKO AP232.
    Unfortunatly a compressor was damaged and have to buy new one. Label is not readable so I would ask you for some advice which models are siutable for AS232...
    Many thanks for your advice...
     
  2. mcsongor

    mcsongor Member

    Joined:
    Oct 2014
    Messages:
    32
    Location:
    romania
    what you need is an air blower motor,not a compressor...
     
  3. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    Semantics :)
     
  4. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Hi,
    Most probably it should be DLT40 from Rietschle Thomas. But I'm sending you a file in attach and easily you can define it exactly by comparing dimensions. When it says for example DLT40, it is 40 cubic meter and pressure is approximately 0.6 bar.
    Good luck,
     

    Attached Files:

  5. smtint3

    smtint3 Member

    Joined:
    Nov 2014
    Messages:
    5
    Location:
    Karachi,pakistan
    Wiring diagram for 1993 CD102-4+L

    We have completed the installation of 1993 CD102-4+L, machine is running perfectly, only 2 wiring diagrams we are missing, one machine diagonal
    registration with CPC.10.3 is not wired yet due to missing diagram and
    Grafix powder spray (EXTRONIC) unit is not wired again due to no diagram.
    we need only 2 wiring diagrams, Please help anyone and send same
     

    Attached Files:

  6. witer30

    witer30 Member

    Joined:
    Jul 2014
    Messages:
    16
    Location:
    Poland
    try this, that diagram is a bit older then your machine but you will have an impression how to connect powder pump...
     

    Attached Files:

  7. witer30

    witer30 Member

    Joined:
    Jul 2014
    Messages:
    16
    Location:
    Poland
    or this one
     

    Attached Files:

  8. smtint3

    smtint3 Member

    Joined:
    Nov 2014
    Messages:
    5
    Location:
    Karachi,pakistan
    I will certainly try, thank you in advance !
     

  9. smtint3

    smtint3 Member

    Joined:
    Nov 2014
    Messages:
    5
    Location:
    Karachi,pakistan
    Will try both and get back to you soon thank you again,
    do you have diagram for the Diagonal register from CPC 1.03
     
Loading...