Cold Foil

Discussion in 'Heidelberg Printing Presses' started by Printman673, Sep 16, 2023.

  1. Printman673

    Printman673 Member

    Joined:
    Sep 2023
    Messages:
    31
    Location:
    Virginia
    Anyone print with cold foil? Been using it for years now just wanted opinions on it.
     
  2. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    35
    Location:
    Egypt
    what do you ant to ask about?
     
  3. Printman673

    Printman673 Member

    Joined:
    Sep 2023
    Messages:
    31
    Location:
    Virginia
    Just get some feedback on it, like glues foils, maybe different techniques I've been doing it for a few years now just wanted to see who used it
     
  4. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    35
    Location:
    Egypt
    we still use it , glues foils
     
  5. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    35
    Location:
    Egypt
    if you have other ideas like glue please share it
     
  6. Printman673

    Printman673 Member

    Joined:
    Sep 2023
    Messages:
    31
    Location:
    Virginia
    We are using a newer glue from INX ifs an HT meaning high tac. Running the density around 80 seems to work out really good but the foil is so inconsistent we are trying a lighter foil from kurz no but haven't tried all the jobs with it
     
  7. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    35
    Location:
    Egypt
    many thanks for your reply
     
  8. Printmaster24

    Printmaster24 New Member

    Joined:
    Oct 2023
    Messages:
    2
    Location:
    Kentucky
    What is your issue
     
  9. Printmaster24

    Printmaster24 New Member

    Joined:
    Oct 2023
    Messages:
    2
    Location:
    Kentucky
    I am very successful at running cold foil
     
  10. Printman673

    Printman673 Member

    Joined:
    Sep 2023
    Messages:
    31
    Location:
    Virginia
    Don't really have any issues in running it, but the foil we use is not consistently good.
     
  11. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    35
    Location:
    Egypt
    we face problem with our foil material or glue
    so can you advise me using a good materials?
     
  12. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    1,249
    Location:
    Casablanca
    Hi sir .
    it's advisable to consult with your foil and glue suppliers. They can provide specific recommendations based on your equipment, substrate, and desired results. Additionally, conduct thorough testing to ensure compatibility and optimal performance.
     
  13. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    1,249
    Location:
    Casablanca
    Choosing the right foil material and glue is essential for successful foil stamping. Here are some considerations:
    For foil material
    Type of Foil:Consider the type of foil you need—metallic, pigment, holographic, etc. Each type has different visual effects.
    Compatibility: Ensure compatibility with your printing substrate. Some foils work better on certain materials.
    Adhesion Properties: Choose a foil with good adhesion properties to prevent flaking or peeling after application.
    Heat Resistance:Verify that the foil can withstand the heat required for the foil stamping process without distortion.
    For Glue
    Adhesive Compatibility:Ensure the glue you use is compatible with the foil material. Some foils may require specific adhesives.
    Drying Time: Consider the drying time of the glue. It should allow enough time for proper foil adhesion without drying too quickly.
    Consistency:The glue should have a consistent texture for uniform application. Inconsistent application can lead to foil adhesion issues.
    Temperature Resistance: Choose a glue that can withstand the elevated temperatures during the foil stamping process.
    Environmental Considerations:if environmental impact is a concern, look for eco-friendly glue options.
    Good luck
     
    Erdal Atalay likes this.

  14. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    35
    Location:
    Egypt
    many thanks Adil
    hope the same to you
     
Loading...