clamping won't go down

Discussion in 'Cutters and Trimmers' started by junjun noman, May 15, 2017.

  1. junjun noman

    junjun noman Member

    Joined:
    Nov 2014
    Messages:
    10
    Location:
    philippines
    good day, need help, we have polar 115E machine number 7031429, clamping won't go down using the pedal but during cutting it will go down. we'll be very thankful for your insights on our problem. God Bless.

    :)jun
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    427
    Location:
    Managua
    Good day Sir
    Sometimes, the Plastic Cam is out of position of position
    air gap:0.0-0.1mms will be of adjustment between cam and plunger
    Let me know if you can fix it with this.
    Otherwise send me some email
    Regards
    superchock@yandex.com
     
  3. ryobiTech

    ryobiTech Member

    Joined:
    Nov 2016
    Messages:
    26
    Location:
    the world
    Check the two bolts holding the pedal in place, they come loose and the pedal no longer works.
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    427
    Location:
    Managua
    Hi sir
    I can undertand that you did not the exactly adjustment
    that i did indicated before. Plastic Cam is out of position or worn, or loose
    air gap:0.0-01mms will be the adjustment between Cam and Plunger.
    Send me some email, and will indicate with some schematic how to do
    it..
    Regards
    superchock@yandex.com
     
Loading...

Share This Page