Cd74 fault ''15"

Discussion in 'Heidelberg Printing Presses' started by NGOCLAN, Nov 12, 2015.

  1. NGOCLAN

    NGOCLAN New Member

    Joined:
    Oct 2015
    Messages:
    2
    Location:
    liksin
    HELP me!
    cd74 run about 5 minutes and death stop ,on cp 2000 show ''15".the air pressure is ok.
    what"s happend ?
    thanks !
     
  2. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    234
    Location:
    Pakistan
    Hi NGOCLAN,

    It will help if you can share pictures of the screen or the dynamic error codes that show up in the diagnosis.
     
  3. NGOCLAN

    NGOCLAN New Member

    Joined:
    Oct 2015
    Messages:
    2
    Location:
    liksin
    komory lithrone 40

    The lithrone 40 at my company damaged bearings,i have not the number code of skf bearing:
    printing rollers
    dampening rollers
    press drum
    and delivery drum
    balance drum
    please send me codes at quachdung@gmail.com
    Thanks.
     

  4. exheidmech

    exheidmech Senior Member

    Joined:
    May 2009
    Messages:
    674
    Location:
    USA
    Error code 15 just means your error is in the electrical cabinet, quite likely has nothing to do with air pressure. More than likely it is a bad board but as already stated more details are needed. Also might not be a bad idea to have a qualified tech come take a look just to make sure you get a warranty on the bad boards if that is your issue.
     
Loading...