bourg collator + stitcher/folder/trimmer compatibility

Discussion in 'Collator-Booklet Maker Systems' started by MC3, Jun 11, 2010.

  1. MC3

    MC3 Member

    Joined:
    Jun 2010
    Messages:
    5
    Location:
    IL
    Looking at a couple of options, used, either BT12 or BST10 with stitcher, folder, and trimmer.

    I could get the BST10 now in some decent but not perfect condition, but will likely need 12+ bins in the future.

    What is the compatibility of the AGR+PA+TR bourg stitcher/folder/trimmer? Will the same AGR+PA+TR stitcher/folder/trimmer work easily with either the BST10 or the BT12? Will any modifications need to be made if I switched collators in the future, or is it "plug and play"?
     
  2. Lcegraphics.com

    Lcegraphics.com Member

    Joined:
    Mar 2010
    Messages:
    10
    Location:
    Tampa, Florda USA
    Hello:
    The BST Tower and the BT12 Towers built before 2002 use the same attachn=ments. AGRT, PAT, and TRT. You can also use the high profile AGRP,PAP and TR with the BST Model only but you must have a lift conveyor called a UTS.

    Joe Castillo / www.Lcegrpahics.com
     
Loading...