Anyone using Sun Chemical Mx12

Discussion in 'Ink' started by Jruff, Jun 9, 2015.

  1. Jruff

    Jruff Member

    Joined:
    May 2014
    Messages:
    13
    Location:
    New Jersey
    received info for this contained ink mixing system and in theory it sounds great. My concerns are the cost of the replacement ink cartridges and how much volume in PMS inks you have to run to make it worthwhile. Has anyone had any experience with this?
     
  2. rchamness19

    rchamness19 Member

    Joined:
    Oct 2015
    Messages:
    19
    Location:
    phila
    Jruff, the Mx12 is made by GFI Sun is a distributor as we are in theory the cost of the replacement tubes should be around the same as ink in 5lb cans maybe a slight upcharge because the tube is more expensive. I would say that you would need to purchase a minimum of 30K in spot colors to make worthwhile. That would get you a three year ROI. Depending on your volume we help our customers with some of the financing
     
  3. Jruff

    Jruff Member

    Joined:
    May 2014
    Messages:
    13
    Location:
    New Jersey
    Thank you for responding, that seems to be the same opinion i got from other vendors and printers.
     
Loading...