agfa lithostar lp82 service manual

Discussion in 'Platemaking' started by NimeshSilva, Aug 18, 2015.

  1. NimeshSilva

    NimeshSilva Senior Member

    Joined:
    Jan 2013
    Messages:
    219
    Location:
    Sri Lanka
    Hi all,
    I'd be very grateful if somebody has the service manual and electrical diagram for agfa lithostar lp82 plate processor. we got some problems with it and need to be corrected very soon.

    Thanks in advance.
     
  2. Guy L.

    Guy L. New Member

    Joined:
    Jan 2018
    Messages:
    2
    Location:
    Virginia, USA
    Hi Nimesh
    Agfa Lithostar LP82 Plate Processor. We are experiencing an electrical problem with the drive of the processor. Do you happened to have a service manual or electrical diagram?
    Thank you very much.
     
  3. Guy L.

    Guy L. New Member

    Joined:
    Jan 2018
    Messages:
    2
    Location:
    Virginia, USA
    By the way, the error code that I am getting is: M12: 3
     
  4. HP INDIGO CARE

    HP INDIGO CARE Member

    Joined:
    Jul 2017
    Messages:
    11
    Location:
    UAE
  5. HP INDIGO CARE

    HP INDIGO CARE Member

    Joined:
    Jul 2017
    Messages:
    11
    Location:
    UAE
    contact hpindigocare@gmail.com
     

  6. HP INDIGO CARE

    HP INDIGO CARE Member

    Joined:
    Jul 2017
    Messages:
    11
    Location:
    UAE
    Check wiring between RS485 on Gateway board
    (U7) and Controller (U6).

    Check motor M12 (Transport Motor) Clean the connections and check the drive belt is working fine without any overload.

    Action
    1 Switch off the processor and restart after 10 sec.
    2 Measure current towards the motor (0.5 — 0.6 A / phase).
     
Loading...

Share This Page