Abnomal operation of main motor (error code: M063E) Lithrone S40

Discussion in 'Komori Printing Presses' started by Phillip Pham, Oct 6, 2020.

  1. Phillip Pham

    Phillip Pham Member

    Joined:
    Oct 2020
    Messages:
    5
    Location:
    Ho Chi Minh city
    Hi guys!
    My offset printer has a problem when I press the start key. When the power is turned on, everything is fine. but when I press the start key, the buzzer starts and then error M063E appears and prevents the machine from running. the engineers checked the electrical diagrams but everything was fine. Right now I don't know what to do.
    please help!
     
  2. Phillip Pham

    Phillip Pham Member

    Joined:
    Oct 2020
    Messages:
    5
    Location:
    Ho Chi Minh city
    Error code M063E
     

    Attached Files:

  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    Normally this alarm starts because some device is out of condition:

    1) check hoist state? is the lamp illuminated in the delivery

    2) oil filter of the oil supply pump dirty?

    3) oil pump overloaded?

    4) Is the press air pressure normal?

    5)Is the automatic chain lubricator normal?

    6)PLC error Communication(CPU/Power)

    7) Is the fountain pan water level normal?

    Blessing
     
    Phillip Pham likes this.
  4. Phillip Pham

    Phillip Pham Member

    Joined:
    Oct 2020
    Messages:
    5
    Location:
    Ho Chi Minh city
    Thank you sir!
    Sometimes the cause comes from the basics.
    Tomorrow, I will check your list and I hope everything will be fine.
     
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    that is true sir

    Blessing
     
  6. Phillip Pham

    Phillip Pham Member

    Joined:
    Oct 2020
    Messages:
    5
    Location:
    Ho Chi Minh city
    I have checked all the problems in your list but the error is still not available. Do you have any oder way sir?
     
  7. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    1)
    Has a timing device error occurred?
    Check if the “Timing Device Error” message
    appears on the touch panel

    2)
    Is the press air pressure normal?
    Check the Sheet Thickness of the “Machine
    monitor”.

    3)
    Has a cylinder engagement device error occurred?
    Check the Sheet Thickness of the “Paper
    size monitor”.

    4)
    Has a grease lubrication error occurred?
    Check the “Lubrication/detector monitor”


    5)
    Is the automatic grease lubrication (
    grease level normal?
    Check the “Lubrication/detector monitor”

    6)
    Has a grease pump error occurred?
    Check if the “Grease pump error” message appears
    on the touch panel

    7)
    Has a grease lubrication sensor error occurred?
    Check if the “Grease lubrication sensor error”
    message appears on the touch panel

    8)Delivery Main Pile Hoist button

    9) Reset Button

    10)
    Is a STOP button pressed?
    11)
    Has a safety bar been activated?
    12)
    Is the windup sheet device operating?
    13)
    Is a safety cover open?
    14)
    Is a delivery cover open?
    15)
    s a plate register window open?
    16)
    Is a footboard open?
    17)
    Option – Impression cylinder cleaning]
    Is the impression cylinder cleaner unit door open?
    18)
    Is the feeder door open?
    19)
    Is the register cover open?
    20)
    Is the manual handle inserted? Or is the main motor
    manual brake release handle set to the OPEN
    position?
    21)
    Check if the “Manual Drive Handle In/Main Motor
    Brake Release” message appear in the touch screen
     
  8. Anand5421

    Anand5421 Member

    Joined:
    Mar 2014
    Messages:
    32
    Location:
    india
    Check with your main drive inside the panel is there any error chk ..
     

  9. Phillip Pham

    Phillip Pham Member

    Joined:
    Oct 2020
    Messages:
    5
    Location:
    Ho Chi Minh city
    Hi sir! We have fixed this error. But do you have Wechat or Facebook or email Anand5421? For the contact.
    My email: virgopham128@gmail.com